料调节器普遍适用于建材、矿山、冶金、石化、电力等行业。用于物料加工、运输、筛选等系统中的物料调节和吸收、缓解物料从高处下落所产生的冲击及粉尘飞扬。能使物料均匀、平稳、规则地缓缓溜到受料装置上。物料调节器系列型式多样、适用广泛、一机多用，在系统中使用本物料调节器可不再设置其它物料缓冲设施和导流装置。

The material adjustor is widely used in building material, mining, metallurgy, oil chemical and electric power industries etc. it adjusts, absorbs and slows the impact and powder rising, which is aroused by the material falling from high altitude. It is used in the system of material processing, transporting and filtering. The material slide to the receiver device equably, calmly and regularly. The type of the adjustor is various and the applicability is wide. There is no need to setup other material cushion device and guiding device when the adjustor is installed in working system.

 

结构特点：

Structure characteristics:

物料调节器是在总结以往各类型物料卸灰、调节设备的基础上研制开发的新式、先进的系列产品，结构采用杠杆原理，独特的传动方式，封闭式的外形，使之具有外形紧凑，启闭灵活，耐磨损、生产运行安全可靠、使用寿命长等特点。本调节器可使下落的物料所产生的飞扬粉尘围困在调节器腔体内，作无规则运动，粉尘之间相互碰撞使其运动逐渐衰减直至静止，粉尘不能溢出污染环境，为获得一个较好的生产环境而创造了有利的条件。

The adjustor is the newest and most advanced product which is designed on the base of all kinds of material discharging and adjusting equipment. The structure makes use of lever principle. The transmission type is particular and the figure is close. It has features of compact structure, flexible open and close, endurance, reliable operation and long life etc. The flying powder dust of falling material can be closed in the body. The pumping among dust grain can reduce the moving until dust is immobile. Dust can not overflow to pollute environment so we can have a good operating circumstance.

 

工作原理：

Working principle:

调节器密封腔体容器内，设有可自动开启、关闭，转动灵活可靠并具有抗冲击、抗振动、耐磨损能力的挡板。挡板的运行由带有一配重块的连杆来实现，连杆及配重块均封闭于两侧箱体内。当调节器存有一定量的物料时，挡板便自动打开，物料顺着挡板开口自然、均匀、平稳地溜下，粉尘仍然封存于调节器内不能溢出。调节器的减振装置消除了挡板及配重块在开启、关闭过程中的振力。

The baffle is set in the sealing body of adjustor, which can open or close automatically, running freely. The baffle also can resist impact and quiver and the ability of anti-abrasion is great. The baffle is controlled by the connecting pole with a heavy block. The connecting pole and heavy block are closed in the body on two sides. The baffle can open automatically when there is some material in the adjustor. The material slip along the baffle smoothly and powder dust is remained in the body. The shock absorber can clear the shock force which is produced when the baffle and heavy block open and close.

 

性能参数：

Performance parameter:

公称压力 Nominal pressure	介质流速 Medium velocity	适用温度 Suitable temperature	适用介质 Suitable medium
0.05MPa	≤28m/s	≤150℃	固体物料、晶体物料 Solid powder, crystalloid

 

WLT--Ⅰ外形连接尺寸：

Appearance joint dimensions:

 

WLT--Ⅱ外形连接尺寸：

Appearance joint dimensions:

 

WLT--Ⅲ外形连接尺寸：

Appearance joint dimensions:

 

WLT--Ⅳ外形连接尺寸：

Appearance joint dimensions:

 

使用说明：

Usage explanation

l  安装前必须清洁阀门内腔，不允许有任何杂物和污垢附着。

l  安装前先检查阀门各传动部分是否完好，试运行无误后将阀门处于全闭状态再进行安装。

l  法兰连接时两法兰间必须加密封垫，然后均匀锁紧联接螺栓。

l  根据客户实际工况需要调整配重块来保证下料量及下料频率。

l   The body must be cleaned before installed and there is no dirt and sundries clinging to the body

l   Check the transmission part before install. Close the valve and install the valve after there is no mistake.

l   Add sealed shim between the two flanges. Lock down the connecting bolt after add sealing washer.

l   Adjust the heavy block according to the working condition of user to ensure the feeding amount and feeding frequency.

 

运输及保管：

Transportation and protection

l  运输时避免撞击调节器，调节器挡板应处于全闭位置，以防在运输中挡板及传动部件损坏。

l  运输时传动部位应作防潮、防雨处理。

l  调节器应存放在干燥的室内，不允许露天存放或堆置。

l  调节器长期存放时应使设备处于关闭状态，各传动部位加润滑油,作防潮、防尘处理。

l   Avoid bumping and the baffle is in full close in order to avoid damage of baffle and driving part

l   Treatment of dampproof and vainproof should be done to transmission part when transport.

l   The adjustor should be stored in dry room and can not be stored or piled up in open air.

l   It should be in full close state when long stored. Add lubrication to the transmission part and the device should be dampproof and dustproof.

 

维护及检修：

Maintenance and examination

l  定期检查各传动部位的运行情况。

l  定期给各传动部位加润滑油。

l  每次检修后，应重新调整配重设施，对检修情况作记录。

l   Examine the operation condition of transmission parts regularly.

l   Add lubricant to transmission parts regularly.

l   Adjust heavy device and note the examination result after examining.

 

订货须知：

Information for order

l  选型时请注明规格口径及与用户系统相适应的安装型式，确认安装角度及下料角度。（安装型式、安装角度、下料角度均参照调节器外形图）。

l  选用订货时，请参照我公司产品样本注明完整的产品的规格、型号及技术参数。

l  用于特殊介质或其它特殊要求，请与我公司经销部、技术部联系，可为您另行设计、制造。

l   Please indicate the specification caliber and installation type suited to user’s system. Make sure of the angle of installation and feeding. Installation type, installation angle and feeding angle refer to appearance figure of adjustor.

l   Please indicate the type, model and technical parameter referring to the product sample when you place an order.

l   If you have other special demand or need special medium. Please contract with our department of market and technology. We can design and manufacture for you especially.